Rear Bumper Impact Bar Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove rear fascia. Refer to Rear Bumper Fascia Replacement (All Utility, Cadillac ESV) or Rear Bumper Fascia Replacement (Avalanche, Cadillac EXT) . |
|
| 1 | Rear Impact Bar Bolts (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 70 N.m (52 lb ft) |
| 2 | Rear Impact Bar Bolts (Qty: 6) Tighten: 100 N.m (74 lb ft) |
| 3 | Rear Bumper Impact Bar Tip: Disconnect any electrical connectors before attempting removal. |