LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Bumper System & Fascia) >> Repair Instructions >> Front Bumper Impact Bar Replacement

Front Bumper Impact Bar Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Front Impact Bar & Bolts
GM1751811Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the front fascia. Refer to Front Bumper Fascia Replacement (Escalade)  or Front Bumper Fascia Replacement (Tahoe)  or Front Bumper Fascia Replacement (Avalanche)  or Front Bumper Fascia Replacement (Z71)  or Front Bumper Fascia Replacement (Yukon) .
1 Front Impact Bar Bolts (Qty: 2)
NOTE: Refer to Fastener Notice .

Tighten:  160 N.m (118 lb ft)

2 Front Impact Bar