Endgate Torque Rod Replacement
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the endgate. Refer to Endgate Replacement (Avalanche/Escalade EXT) . |
|
| 1 | Torque Rod Retainer Bolt
NOTE:
Refer to Fastener Notice
. Tip: Loosen bolt only, DO NOT remove. Tighten: 12 N.m (106 lb in) |
| 2 | Torque Rod Assembly |