Endgate Replacement (Avalanche/Escalade EXT)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the endgate torque rod. Refer to Endgate Torque Rod Replacement . |
|
| 1 | Electrical Connector Tip: If equipped with a rear camera, disconnect the electrical connector located under the vehicle. |
| 2 | Endgate Support Cable Tip: Disconnect the endgate support cables. |
| 3 | Endgate Tip: With the aid of an assistant, remove the endgate. |