Radiator Grille Emblem/Nameplate Replacement (Chevrolet Tahoe Two-mode Hybrid)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
NOTE:
Refer to Exterior Trim Emblem Removal Notice
. Preliminary Procedure: Remove the radiator upper grille. Refer to Radiator Upper Grille Replacement (Chevrolet Tahoe Two-mode Hybrid) or Radiator Upper Grille Replacement (PLATINUM) . |
|
| 1 | Radiator Grille Emblem Assembly Nut (Qty: 2)
NOTE:
Refer to Fastener Notice
.
Tighten: 1.5 N.m (13 lb in) |
| 2 | Radiator Grille Emblem Assembly Tip: Ensure the foam tape is on the emblem for installation. |