Fascia Grille Replacement (GMC Yukon Two-mode Hybrid)
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (Escalade) or Front Bumper Fascia Replacement (Tahoe) or Front Bumper Fascia Replacement (Avalanche) or Front Bumper Fascia Replacement (Z71) or Front Bumper Fascia Replacement (Yukon) . |
|
| 1 | Front Grille Screw (Qty: 4)
NOTE:
Refer to Fastener Notice
.
Tighten: 1.5 N.m (13 lb in) |
| 2 | Front Grille Retainer Tab (Qty: 8) |
| 3 | Front Grille Assembly Tip: Release the retainers from inside the front bumper fascia and remove the grille from the front bumper fascia. |