LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 160 (Engine Mechanical - 4.8L, 5.3L, 6.0L And 6.2L (3 Of 5)) >> Off-Vehicle Repair Instructions (1 Of 3) >> Valve Lifter Removal (RPO LY2/LY6)

Valve Lifter Removal (RPO LY2/LY6)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Valve Lifter Guides, Cylinder Head & Bolts
    GM1403318Courtesy of GENERAL MOTORS CORP.
  1. Remove the guide bolts (211).
  2. Remove the guides (210) with lifters.

    Note the installed position of the guides. The notched area of the guide is to align with the locating tab on the block.

    3. Fig 2: Valve Lifter Guides & Bolts
    GM1403319Courtesy of GENERAL MOTORS CORP.
  3. Remove the valve lifters (209) from the guide (210).
  4. Organize or mark the components so they can be installed in the same location from which they were removed. Refer to Separating Parts .
scientia non olet · About LEMON Manuals