LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 156 (Transfer Case - BW 4485-Nr3 AWD) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Input Seal Removal Special Tools
    GM1728910Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: It may be necessary to use a sharp punch in order to poke a hole into the seal prior to inserting J 36825  . See Special Tools .
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Using the J 23907  (1), and J 36825  (2), remove the input seal. See Special Tools .
scientia non olet · About LEMON Manuals