Special Tools

WARNING: This page is about a different car, the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Cadillac Escalade EXT, 2007 Cadillac Escalade ESV, and 2007 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools

Illustration	Tool Number/Description
Courtesy of GENERAL MOTORS CORP.	J 2619-01 Slide Hammer
Courtesy of GENERAL MOTORS CORP.	J 3289-20 Holding Fixture
Courtesy of GENERAL MOTORS CORP.	J 8092 Driver Handle
Courtesy of GENERAL MOTORS CORP.	J 22912-01 Rear Pinion and Axle Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 23907 Slide Hammer with Bearing Adapter
Courtesy of GENERAL MOTORS CORP.	J 26941 Bushing and Bearing Remover - 3-4 inch
Courtesy of GENERAL MOTORS CORP.	J 36825 Output Shaft Oil Seal Remover (4WD Models Only)
Courtesy of GENERAL MOTORS CORP.	J 36850 Transjel Lubricant
Courtesy of GENERAL MOTORS CORP.	J 42176 Universal Driver Handle - Non-Threaded
Courtesy of GENERAL MOTORS CORP.	J 42738 Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 43484 Front Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45124 Removal Bridge
Courtesy of GENERAL MOTORS CORP.	J-45124-9 Puller Legs
Courtesy of GENERAL MOTORS CORP.	J 45358 Case Spreader
Courtesy of GENERAL MOTORS CORP.	J 45548 Mainshaft Support Bushing/Bearing Remover
Courtesy of GENERAL MOTORS CORP.	J 45756 Rear Output Shaft Seal Installer
Courtesy of GENERAL MOTORS CORP.	J 45757 Mainshaft Support Bushing and Bearing Installer
Courtesy of GENERAL MOTORS CORP.	J 45759 Assembly Fixture