LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Suspension Control System - Suspension Damping) >> Repair Instructions >> Front Position Sensor Link Assembly Replacement - Electronic Suspension >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Link Rods To Ball Studs Using J 38185
    GM613614Courtesy of GENERAL MOTORS CORP.
  1. Using the J 38185  install to link rod to the ball stud on the sensor lever and the mounting bracket.
  2. Install the ESC sensor to the vehicle. Refer to Front Position Sensor Replacement - Electronic Suspension .