LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Assist Handle Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Instrument Panel Assist Handle
    GM1912380Courtesy of GENERAL MOTORS CORP.
  1. Align the instrument panel assist handle (3) to the openings within the instrument panel.
  2. Push the assist handle inward until an audible click is heard.
  3. Pull out on the assist handle to ensure the assist handle is locked into the instrument panel.
  4. Install the right air outlet assembly. Refer to Instrument Panel Outer Air Outlet Bezel Replacement - Right Side .
  5. Install the center air outlet assembly. Refer to Instrument Panel Center Air Outlet Bezel Replacement .
scientia non olet · About LEMON Manuals