LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Pump Fluid Accumulator Disposal

Power Brake Booster Pump Fluid Accumulator Disposal

Fig 1: Power Brake Booster Pump Fluid Accumulator
GM1977972Courtesy of GENERAL MOTORS CORP.
Callout Component Name
CAUTION: Refer to Safety Glasses Caution .
CAUTION: Refer to Brake Fluid Irritant Caution .
NOTE: Refer to Brake Fluid Effects on Paint and Electrical Components Notice .
Preliminary Procedure: Remove the power brake booster accumulator. Refer to Hydraulic Brake Booster Accumulator Replacement .
1 Power Brake Booster Accumulator

Procedure

  1. Clamp the accumulator in a vise.
  2. Cover the accumulator with a cloth.
  3. Using a hand saw, cut the accumulator body between a and b according to specification to discharge the gas and fluid inside.
  4. Discard both accumulator halves in the proper waste container.

Specification: 

  • Distance between a and b: 100 mm (4 in)
  • Distance from top of accumulator hex and b: 20 mm (0.79 in)
scientia non olet · About LEMON Manuals