LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Sunroof >> Repair Instructions >> Sunroof Sunshade Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Headliner Trim Panel
    GM1842082Courtesy of GENERAL MOTORS CORP.
  1. Install the sunshade panel by sliding forward into the sunroof module.
  2. NOTE: Refer to Fastener Notice .
  3. Install the sunshade panel rubber stops.

    Tighten:  Tighten the stop screws to 3 N.m (26 lb in).

  4. Install the headliner. Refer to Headlining Trim Panel Replacement (SUT) or Headlining Trim Panel Replacement (SUV) .