LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Replacement >> Notes

Front Bumper Replacement: Notes

    Fig 1: Grille & Brush Guard
    GM824708Courtesy of GENERAL MOTORS CORP.
  1. Remove the front grille guard, if equipped. Refer to Grille Guard/Brush Guard Replacement (Base) or Grille Guard/Brush Guard Replacement (WS2, V3M) .
    2. Fig 2: Bumper Bar Bolts
    GM815434Courtesy of GENERAL MOTORS CORP.
  2. Remove the 2 lower bolts from the bumper bar.
    3. Fig 3: View Of Fascia Plugs
    GM1453827Courtesy of GENERAL MOTORS CORP.
  3. Remove the 2 plugs (1) from the front fascia (2).
  4. Disconnect the electrical connector to the daytime running lamps (DRL).
    5. Fig 4: Front Bumper Assembly
    GM815435Courtesy of GENERAL MOTORS CORP.
  5. Remove the 2 upper bolts from the bumper bar.
  6. Remove the front bumper assembly from the vehicle.
scientia non olet · About LEMON Manuals