LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Vehicle Access >> Repair Instructions >> Liftgate Lock Striker Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Liftgate Lock Striker
    GM870174Courtesy of GENERAL MOTORS CORP.
  1. Position the striker, to the location marks.
    2. NOTE: Refer to Fastener Notice .
  2. Install the fasteners (1) to the striker.

    Tighten:  Tighten fasteners to 25 N.m (18 lb ft).

  3. Install the liftgate door sill plate. Refer to Liftgate Sill Trim Plate Replacement .
scientia non olet · About LEMON Manuals