LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Wipers And Washers >> Repair Instructions >> Rear Window Washer Pump Hose Replacement - Headliner >> Installation Procedure

Installation Procedure

    Fig 1: Headliner Washer Hose
    GM869377Courtesy of GENERAL MOTORS CORP.
  1. Lay the new washer hose in place next to the original to ensure proper routing (1), and epoxy the new washer hose to the headliner and to the original washer hose.
  2. Install the headliner. Refer to Headlining Trim Panel Replacement (SUT) or Headlining Trim Panel Replacement (SUV) .