LEMON Manuals: Even more car manuals for everyone
Home >> Hummer >> 2008 >> H2 4D Utility Wagon >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting >> Repair Instructions >> Rear Side Marker Lamp Replacement (SUV) >> Removal Procedure

Removal Procedure

  1. Remove the interior trim panel. Refer to Rear Side Door Sill Plate Replacement .
  2. Remove the wiring harness fastener from the body.
  3. Fig 1: Rear Side Marker Lamp (SUV)
    GM803115Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the electrical connector.
  5. Remove the screws from the lamp.
  6. Remove the lamp, with the attached harness, from the vehicle.