HOURMETER Inaccurate Or Inoperative
Hourmeter Inaccurate or Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics | |||
| 1 | Did you perform the Instrument Cluster Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Instrument Cluster |
| 2 | Verify the hourmeter operation. Refer to Instrument Panel Cluster (IPC) Description and Operation . Does the hourmeter operate normally? |
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 | Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement . Did you complete the replacement? |
Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |