How to Clear DTCs

WARNING: This page is about a different variant/trim than selected.

1. Turn the vehicle to the OFF (LOCK) mode, then connect the HDS to the DLC

2. Turn the vehicle to the ON mode.

3. Make sure the HDS communicates with the vehicle and the real time AWD control unit. If it does not communicate, go to the real time AWD system symptom troubleshooting for HDS does not communicate

4. Clear the DTC(s) by following the screen prompts on the HDS.

5. Turn the vehicle to the OFF (LOCK) mode.

NOTE: If the DTC that was cleared is related to another system, that system's DTC must be repaired, or the real time AWD DTC will return.