DTC U0312 (124) (Battery Condition Monitor Module)
WARNING: This page is about a different variant/trim than selected.
DTC U0312 : Battery Condition Monitor Module Programming Error (Version Mismatch)
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| U0312 Battery Condition Monitor Module Programming Error (Version Mismatch) |
DTC (Electric Powertrain)
- Problem verification (update)
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode, and wait 30 seconds.
-4. Turn the vehicle to the ON mode.
-5. Update the battery condition monitor module .
-6. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame U0312 Battery Condition Monitor Module Programming Error (Version Mismatch) Is DTC U0312 indicated?
YES
Replace the battery condition monitor module .
NO
Update is complete.