DTC P0D32 (417) (Battery Condition Monitor Module)

DTC P0D32  : DC-DC Converter Over Temperature (Battery Condition Monitor Module Detected)

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   Turn the vehicle to READY TO DRIVE mode, and wait 750 seconds under these conditions.

   • Headlights on high beam
   • Hazard warning lights on
   • Blower fan at maximum speed
   • Rear window defogger on
   • Seat heater on, max hot
   • A/C switch ON, heater on, max hot

   -4. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0D32 DC-DC Converter Over Temperature (Battery Condition Monitor Module Detected)

   Is DTC P0D32 indicated?

   YES 

   The failure is duplicated. Go to step 2.

   NO 

   Intermittent failure, the system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.

2. PCU coolant circuit check

   -1. Do the PCU coolant circuit inspection .

   Is it OK?

   YES 

   Check the cooling fan operation. If it is OK, replace the PCU .

   NO 

   Repair or replace parts as needed.