DTC P0DFB (294)
WARNING: This page is about a different variant/trim than selected.
DTC P0DFB : Generator Motor Rotor Position Sensor Exceeding Learn Limit
NOTE:
- Before you troubleshoot, review the general troubleshooting information .
- This DTC will be stored when the generator motor motor rotor position sensor is poor installation.
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P0DFB Generator Motor Rotor Position Sensor Exceeding Learn Limit |
DTC (Electric Powertrain)
- Problem verification
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode.
-5. Do the generator motor motor rotor position sensor calibration .
Is calibration completed?
YES
Intermittent failure. The system is OK at this time. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.
NO
Faulty generator motor motor rotor position sensor. Replace the transmission (e-CVT) assembly .