DTC P0A4B (293), P0A4C (473), P0A4D (474)

DTC P0A4B  : Generator Motor Rotor Position Sensor Circuit

DTC P0A4C  : Generator Motor Rotor Position Sensor Circuit Range/Performance

DTC P0A4D  : Generator Motor Rotor Position Sensor Circuit Low

NOTE:  Before you troubleshoot, review the general troubleshooting information .

DTC (Electric Powertrain)

1. Problem verification

   -1. Turn the vehicle to the ON mode.

   -2. Clear the DTC with the HDS.

   -3. Turn the vehicle to the OFF (LOCK) mode.

   -4. Turn the vehicle to the ON mode.

   -5. Monitor the OBD STATUS for DTC P0A4B, P0A4C, and P0A4D in the DTCs MENU with the HDS.

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0A4B Generator Motor Rotor Position Sensor Circuit
   P0A4C Generator Motor Rotor Position Sensor Circuit Range/Performance

   DTC Description	Confirmed DTC	Pending DTC	Freeze Frame
   P0A4D Generator Motor Rotor Position Sensor Circuit Low

   Does the HDS indicate FAILED?

   YES 

   The failure is duplicated. Go to step 2.

   NO 

   If the HDS indicates PASSED, the system is OK at this time but has an intermittent failure. If the HDS indicates NOT COMPLETED, keep the vehicle in the ON mode until an indication comes on. If the freeze data/on-board snapshot of this DTC is recorded, try to reproduce the failure under the same conditions with the freeze data/on-board snapshot.

2. Generator motor motor rotor position sensor circuit check

   -1. Do the generator motor motor rotor position sensor circuit inspection .

   Is it OK?

   YES 

   The generator motor motor rotor position sensor circuit is OK. Faulty generator motor motor rotor position sensor. Replace the transmission (e-CVT) assembly .

   NO 

   Repair an open or short in the generator motor motor rotor position sensor circuit between the PCU and the generator motor motor rotor position sensor.