DTC P0602 (92) (Battery Condition Monitor Module)
WARNING: This page is about a different variant/trim than selected.
DTC P0602 : Battery Condition Monitor Module Programming Error
NOTE: Before you troubleshoot, review the general troubleshooting information .
| DTC Description | Confirmed DTC | Pending DTC | Freeze Frame |
|---|---|---|---|
| P0602 Battery Condition Monitor Module Programming Error |
DTC (Electric Powertrain)
- Problem verification (update)
-1. Turn the vehicle to the ON mode.
-2. Clear the DTC with the HDS.
-3. Turn the vehicle to the OFF (LOCK) mode.
-4. Turn the vehicle to the ON mode.
-5. Do the battery condition monitor module update procedure .
-6. Check for Pending or Confirmed DTCs with the HDS.
DTC Description Confirmed DTC Pending DTC Freeze Frame P0602 Battery Condition Monitor Module Programming Error Is DTC P0602 indicated?
YES
Replace the battery condition monitor module .
NO
The update is complete. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.