DTC U0110 (PGM-FI System)

DTC U0110  : EP-CAN Malfunction (PCM-Motor Control Module)

NOTE: 

• Before you troubleshoot, review the general troubleshooting information .
• If DTC U0110 is indicated alone, do the troubleshooting for DTC U1205 using the on-board snapshot for U0110.
• If any of the DTCs listed below are indicated at the same time as DTC U0110, troubleshoot those DTCs first, then recheck for U0110.
• • -

    U1205: Motor control module

DTC (PGM-FI)

1. DTC check

   -1. Turn the vehicle to the ON mode.

   -2. Check for Pending or Confirmed DTCs with the HDS.

   DTC Description	Confirmed DTC	Pending DTC
   U0110 EP-CAN Malfunction (PCM-Motor Control Module)
   U1205 EP-CAN Malfunction (PCM-Motor Control Module)

   Are DTC U1205 and U0110 indicated at the same time?

   YES 

   Go to the indicated DTC's troubleshooting.

   NO 

   Go to the troubleshooting for DTC U1205  using the on-board snapshot for DTC U0110.