Auto High-Beam Activation Indicator (Green)
WARNING: This page is about a different variant/trim than selected.
If the Auto High-Beam system is normal, the Auto High-Beam activation indicator comes on when the function is on, and goes off when the function is off. If the system malfunctions, turns off the Auto High-Beam activation indicator, indicates the problem on the multi-information display (MID).
NOTE:
- For locations of the indicator, refer to Gauges Component Location Index .
- For Auto High-Beam function, review the Auto High-Beam Description .
- The Auto High-Beam communicates with other control units via F-CAN. For Auto High-Beam system diagram, review the Auto High-Beam System Diagram .