Torque converter clutch does not disengage; engine stalls easily (CVT: With Auto Idle Stop System)
WARNING: This page is about a different variant/trim than selected.
Probable cause (s)
- Shift solenoid valve B defective
- CVT lock-up clutch control solenoid valve defective
- Torque converter clutch piston defective
- Valve body assembly defective
NOTES:
- Inspect shift solenoid valve B .
- Inspect the CVT lock-up clutch control solenoid valve .
- Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly .
- Check the valve body assembly for wear and damage.