Stall speed low (CVT: Without Auto Idle Stop System)
WARNING: This page is about a different variant/trim than selected.
Probable cause (s)
- TCM defective
- Engine output low
- Valve body assembly defective
- Joint pipes defective
- Stator shaft worn or damaged
- Torque converter assembly defective
- Torque converter ring gear worn or damaged
- Transmission assembly and drive plate installation defective
NOTES:
- Adjust the engine output.
- Check the valve body assembly for wear and damage.
- Check the joint pipes and O-rings for wear and damage.
- Check the stator shaft for wear and damage.
- Inspect the torque converter assembly for wear and damage. If the torque converter assembly is worn or damaged, replace it as an assembly .