Evaporator Temperature Sensor Test
- Remove the evaporator temperature sensor (see EVAPORATOR TEMPERATURE SENSOR REPLACEMENT
).
- Dip the sensor in ice water, and measure the resistance between terminals No. 1 and No. 2.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- Pour warm water on the sensor, and measure the resistance.
- Compare the resistance readings with the specifications shown in the graph; the resistance should be within the specifications.
Courtesy of AMERICAN HONDA MOTOR CO., INC.
- If the resistance is not as specified, replace the evaporator temperature sensor (see EVAPORATOR TEMPERATURE SENSOR REPLACEMENT
).