LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Restraint System >> Front Passenger's Airbag Replacement >> Removal after a collision where the front passenger's airbag deployed

Removal after a collision where the front passenger's airbag deployed

  1. Do the 12 volt battery terminal disconnection procedure (see 12 VOLT BATTERY TERMINAL DISCONNECTION AND RECONNECTION ), then wait at least 3 minutes before starting work.
  2. Remove the glove box (see PASSENGER'S DASHBOARD UNDERCOVER REMOVAL/INSTALLATION ).
  3. Disconnect the front passenger's airbag inflator 4P connector (A).
    Fig 1: Identifying Front Passenger's Airbag Inflator 4P Connector And Mounting Bolts
    G06952522Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Remove the mounting bolts (B).
  5. Remove the dashboard upper panel (A) and the front passenger's airbag (B) assembly from the dashboard (C) (see COLUMN BLIND REMOVAL/INSTALLATION ).
    Fig 2: Removing Dashboard Upper Panel And Front Passenger's Airbag Assembly From Dashboard
    G06952523Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals