LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Tensioner Pulley Replacement

Tensioner Pulley Replacement

  1. Remove the auto-tensioner (see DRIVE BELT AUTO-TENSIONER REPLACEMENT  ).
  2. Remove the tensioner pulley. The tensioner pulley bolt has left-hand threads.
    Fig 1: Auto-Tensioner Pulley With Mounting Bolts Torque Specification
    G06949675Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the auto-tensioner in the reverse order of removal.
scientia non olet · About LEMON Manuals