LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2013 >> CR-Z Base, Automatic CVT Trans >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio System >> Symptom Troubleshooting >> Audio unit button does not work (without navigation)

Audio unit button does not work (without navigation)

NOTE:
  1. Go to the audio button, knob, and audio remote switch detection mode in the audio Self-Diagnostic Function (see HOW TO CHECK THE AUDIO SYSTEM CONDITION  ). Operate all items in the appropriate switch list.

    Switch list 

    1-6, EJECT, FM/AM, CD, AUX, TITLE, Music/Speaker, SCAN, RPT, RDM/A.SEL, VOL PUSH SELECT, SEEK, PLAY, RETURN, PWR

    Are all the items in the appropriate switch list detected? 

    YES  -Operation is normal.

    NO  -Substitute a known-good center panel (see step  9 ), and recheck. If the symptom/indication goes away, replace the original center panel (see step  9 ). If the symptom is still present, replace the audio unit (see AUDIO UNIT REMOVAL/INSTALLATION  ).