Audio disc does not play
NOTE:
- Check the vehicle battery condition first (see 12 VOLT BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio-navigation unit or audio unit. They may damage and jam the player mechanism.
- Turn the ignition switch to ON (II).
- Turn on the audio-navigation unit or the audio unit, and try loading a disc.
Does the disc load?
YES -Go to step 3.
NO -Go to AUDIO DISC DOES NOT LOAD .
- Insert the audio diagnostic CD (T/N: 07AAZ-SDBA100) in the audio-navigation unit or audio unit.
Does the disc play?
YES -The original disc is faulty, or has an unreadable format.
NO -
- With navigation: Substitute a known-good audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
- Without navigation: Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).
Special Tools Required
- Diagnostic CD 07AAZ-SDBA100
- Skip Test CD 07AAZ-SDBA200
- Skip Test CD 07AAZ-SDBA300