Audio disc does not load
NOTE:
- Check the vehicle battery condition first (see 12 VOLT BATTERY TEST ).
- Check the connectors for poor connections or loose terminals.
- Disc labels should not be used in the audio-navigation unit or the audio unit. They may damage and jam the player mechanism.
- Make sure the disc is compatible with the system (see the owner's manual for more information).
- Turn the ignition switch to ON (II).
- Turn on the audio-navigation unit or the audio unit, and insert a known-good disc to see if the symptom can be duplicated.
Does the disc load?
YES -Operation is normal. If the disc loads normally, but will not play, go to AUDIO DISC DOES NOT PLAY .
NO -Go to step 3.
- Insert another disc.
Does the disc load?
YES -The original disc is faulty.
NO -
- With navigation: Substitute a known-good audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio-navigation unit (see AUDIO-NAVIGATION UNIT REMOVAL/INSTALLATION ).
- Without navigation: Substitute a known-good audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ), and recheck. If the symptom/indication goes away, replace the original audio unit (see AUDIO UNIT REMOVAL/INSTALLATION ).