LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Pickup Bed >> Rear Air Outlet Replacement >> Body Side Outlet

Body Side Outlet

  1. Remove the front bed panel (see FRONT BED PANEL REMOVAL/INSTALLATION ).
  2. Release the hooks (A), then remove the rear air outlet (B). Take care not to scratch the body.
    Fig 1: Identifying Hooks And Rear Air Outlet
    G05965917Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the air outlet by pushing on the hook portions until the hooks snap into place.
  4. Reinstall the front bed panel (see FRONT BED PANEL REMOVAL/INSTALLATION ).
scientia non olet · About LEMON Manuals