LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Pickup Bed >> Front Bed Panel Removal/Installation

Front Bed Panel Removal/Installation

NOTE:
  • Put on gloves to protect your hands.
  • Take care not to scratch the bed panels and body.
  1. Remove the bolts using a TORX T50 bit, then remove the front upper tie-down hooks (A) from both sides of the side bed panel (B).
    Fig 1: Front Upper Tie-Down Hooks And Side Bed Panel With Torque Specifications
    G05965903Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Remove the bolts using a TORX T40 bit, then remove the front bed panel (A).
    Fig 2: Front Bed Panel And Bolts With Torque Specifications
    G05965904Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Install the panel in the reverse order of removal.
scientia non olet · About LEMON Manuals