LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2012 >> Ridgeline RTL >> Repair and Diagnosis (Single Page) >> Body & Frame >> Exterior Body Panels >> Pickup Bed >> Rear Air Outlet Replacement >> Bed Floor Side Outlet

Bed Floor Side Outlet

  1. Open the in-bed trunk lid.
  2. Remove the jack, and the tool box, the spare tire, and the spare tire tray (see BED FLOOR REMOVAL/INSTALLATION ).
  3. From inside the bed floor, detach the hooks (A), then remove the rear air outlet (B) to outside of the bed floor (C), and pass the outlet to the inside through the outlet opening in the bed floor. Take care not to scratch the bed floor.
    Fig 1: Identifying Rear Air Outlet, Bed Floor And Hooks
    G05965918Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. Install the air outlet in the reverse order of removal, and pull on the hook portions until the hooks snap into place.
scientia non olet · About LEMON Manuals