Gauges & Instrument Panels: Gauges
- Component Location Index
- Self-diagnostic Function
- Notes
- Entering the self-diagnostic function with the HDS
- Entering the self-diagnostic function (manual method)
- The Indicator Drive Circuit Check
- The Beeper Drive Circuit Check
- Switch Input Check
- The LCD Segment Check
- The Gauge Drive Circuit Check
- The Communication Line Check
- Ending the Self-Diagnostic Function
- Circuit Diagram
- DTC Troubleshooting
- DTC B1152: Gauge Control Module Internal Error (EEPROM error)
- DTC B1155, B1156, B1157, B1159: Gauge Control Module Lost Communication With the MICU (Headlight Switch Message); Gauge Control Module Lost Communication With the MICU (Wiper Switch Message); Gauge Control Module Lost Communication With the MICU (MICU Message); Gauge Control Module Lost Communication With the MICU (Door Switch Message)
- DTC B1168, B1169: Gauge Control Module Lost Communication With ECM/PCM (Engine Messages); Gauge Control Module Lost Communication With the PCM (A/T Message)
- DTC B1170: Gauge Control Module Lost Communication With VSA/ABS Modulator-Control Unit (VSA/ABS Message)
- DTC B1173: Gauge Control Module Lost Communication With TPMS Control Unit (TPMS message)
- DTC B1183: Gauge Control Module Lost Communication With EPS Control Unit (EPS Message)
- DTC B1187: Gauge Control Module Lost Communication With SRS Unit (SRS Message)
- DTC B1188: Gauge Control Module Lost Communication With MICU (RM Message)
- Gauge Control Module Input Test
- Rewriting the ODO Data and Transferring the Maintenance Minder Data To a New Gauge Control Module
- Gauge Control Module Replacement