LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2009 >> S2000 L4-2.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Cylinder Head Assembly >> Rocker Arm Assembly >> Service and Repair >> Removal and Replacement >> Rocker Arm Assembly Removal

Rocker Arm Assembly Removal




Rocker Arm Assembly Removal

1. Remove the cylinder head cover. Cylinder Head Cover Removal

2. Loosen the locknuts and the adjusting screws (A).

3. Remove the camshaft holders and the camshafts To prevent damaging the camshafts, loosen the camshaft holder bolts in sequence two turns at a time, in a crisscross pattern.. Cylinder Head Removal






4. Insert the bolts (A) into the rocker shaft holder, then remove the rocker arm assembly (B).





scientia non olet · About LEMON Manuals