LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2007 >> Ridgeline RTL >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> Select/Reset Switch Test/Replacement

Select/Reset Switch Test/Replacement

  1. Remove the instrument panel (see INSTRUMENT PANEL REMOVAL/INSTALLATION ).
  2. Carefully push out the select/reset switch (A) from behind the instrument panel.
    Fig 1: Identifying Select/Reset Switch
    G05593107Courtesy of AMERICAN HONDA MOTOR CO., INC.
  3. Check for continuity between the terminals in each switch position as shown.
    Fig 2: Checking For Continuity Between Terminals In Each Switch Position As Shown
    G05593108Courtesy of AMERICAN HONDA MOTOR CO., INC.
  4. If the continuity is not as specified, replace the illumination bulb (B) or the switch.
scientia non olet · About LEMON Manuals