Self-Diagnostic System: Notes
WARNING: This page is about a different car, the 2000 Isuzu Rodeo and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If PCM requires replacement, it must be reprogrammed using TECH II or other OBD-II compatible scan tool. Some models may require additional equipment to program EEPROM.
NOTE:
See PIN VOLTAGE CHARTS
and SYSTEM WIRING DIAGRAMS
articles for PCM harness connector, wire terminal and wire color identification.
NOTE:
Perform all voltage tests with a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm impedance unless stated otherwise in test procedure.