LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls - Self-Diagnostics - 2.2L) >> Diagnostic Trouble Code Identification >> DTC P0341: Camshaft Position (CMP) Sensor Circuit >> Circuit Description

Circuit Description

WARNING: This page is about a different car, the 2000 Isuzu Rodeo and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.

Camshaft Position Sensor (CMP) signal pulses are used by PCM to initiate fuel injection. CMP and CKP sensor pulses are constantly being compared to each other. PCM will set DTC P0341 if CMP sensor pulses are not in proper ratio to 58X reference pulses.

Conditions required to set DTC are:

scientia non olet · About LEMON Manuals