LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls - Self-Diagnostics - 2.2L) >> Diagnostic Trouble Code Identification >> DTC P0336: Crankshaft Position (CKP) Sensor Circuit Range/Performance >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2000 Isuzu Rodeo and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.

Check for poor connection at PCM. Inspect harness connectors for backed-out terminals, improper mating, broken locks, improperly formed or damaged terminals and poor terminal connection. Observe a voltmeter connected to 58X CKP sensor reference circuit at PCM harness connector while moving all related harnesses and connectors. A change in voltage indicates fault location. If DTC cannot be duplicated, check scan tool FAILURE RECORDS to determine mileage since last DTC was set.

scientia non olet · About LEMON Manuals