Diagnostic Aids
WARNING: This page is about a different car, the 2000 Isuzu Rodeo and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.
Check fuel pressure. Check fuel injector operation. Disconnect MAF sensor connector and see if rich condition is corrected. If rich condition is corrected, replace MAF sensor.
Check for faulty TP sensor operation. Check for faulty connections or damaged harness. If connections and harness appear okay, observe HO2S-1 display on scan tool while moving all related harnesses and connectors. A change in scan tool display indicates fault location. If DTC cannot be duplicated, check scan tool FAILURE RECORDS to determine mileage since last DTC was set.