LEMON Manuals: Even more car manuals for everyone
Home >> Honda >> 2000 >> CR-V SE, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Disc & Drum) >> Removal & Installation >> Rear Disc Brake Caliper >> Installation

Rear Disc Brake Caliper: Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2001 Isuzu Rodeo Sport, 2001 Isuzu Rodeo, 2001 Honda Passport, 2000 Isuzu Rodeo, and 2000 Isuzu Amigo. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Depress caliper piston using pliers. Apply Silicone grease to caliper sliding surfaces. Ensure hooked edge of flex hose is in hole to prevent rotation. Bleed hydraulic system. Adjust parking brake. See PARKING BRAKE (REAR DISC)  under ADJUSTMENTS.

scientia non olet · About LEMON Manuals