Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Instrument Panel Cluster Control Module (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Instrument Cluster Bolt (1) - Install and tighten [4x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Connect the electrical connector.
Instrument Panel Extension (1) - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Connect the electrical connector.
Windshield Garnish Molding - Left Side and Right Side (1) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Windshield Pillar Assist Handle Bolt - Left Side and Right Side (2) - Install and tighten [4x] - Fastener Specifications
Windshield Pillar Assist Handle Cover - Left Side and Right Side (1) - Install [4x]
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Body Hinge Pillar Garnish Molding - Left Side and Right Side (1) - Install [2x]
Install the weatherstrip as necessary.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Left side shown, right side similar.

Instrument Panel Outer Trim Cover - Left Side and Right Side (1) - Install [2x]
Perform the necessary programming and setup procedure: Control Module References