Installation Procedure
Install the left front brake front pipe (1) into the vehicle.
Remove the cap from the front brake rear pipe outlet.
- Rear Brake Rear Pipe Nut (1) - Install and tighten - Fastener Specifications
Remove the plug from the front brake hose inlet.
- Front Brake Pipe Clip (1) - Install [2x]
- Rear Brake Rear Pipe Nut (2) - Install and tighten - Fastener Specifications
Reposition the front wheelhouse rear liner (1).
- Front Wheelhouse Liner Bolt (2) - Install and tighten - Fastener Specifications
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Bleed the brake system. Hydraulic Brake System Bleeding
- Install the left front tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.
CAUTION: