Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Lubricate the brake master cylinder reservoir seals (2) with GM approved brake fluid from a clean, sealed brake fluid container. Adhesives, Fluids, Lubricants, and Sealers
Brake Master Cylinder Reservoir Seal (2) - Install NEW [3x]
Brake Master Cylinder Reservoir (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Brake Master Cylinder Bolt (1) - Install and tighten [2x] - Fastener Specifications
Electrical Connector @ Brake Fluid Level Indicator Switch - Connect
Bleed the brake system. Hydraulic Brake System Bleeding
Check for brake system leaks.
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Side Sight Shield (1) - Install
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Side Sight Shield Retainer (1) - Install [3x]
Connect the battery negative cable. Battery Negative Cable Disconnection and Connection