LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Pickup Box Endgate Cable Replacement >> Installation Procedure

Installation Procedure

  1. GM5830361Courtesy of GENERAL MOTORS COMPANY

    Pickup Box Endgate Cable (2) - Install

  2. If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
    1. Remove any loose cured adhesive from the external threads of the components using a lint free cloth.
    2. Thread the cleaned components into the internal mating threads and remove to loosen trapped cured adhesive.
    3. Apply thread locking adhesive to the external threads of the components.Adhesives, Fluids, Lubricants, and Sealers  
    4. Ensure there are no gaps in the thread locking adhesive once applied to the component.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Pickup Box Endgate Latch Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  4. Close the endgate.
scientia non olet · About LEMON Manuals