LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2022 >> Hummer EV >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Pickup Box Auxiliary Endgate Dampener Replacement >> Installation Procedure

Installation Procedure

  1. GM5043664Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Ensure the clip is fully seated when the damper is reinstalled. If the clip cannot be fully seated, a new damper should be installed.

    Pickup Box Auxiliary Endgate Dampener (1) - Install

  2. GM5814845Courtesy of GENERAL MOTORS COMPANY

    Pickup Box Endgate Access Hole Cover Panel (2) - Install

    3. CAUTION:

    Refer to Fastener Caution .

  3. Pickup Box Endgate Access Hole Cover Panel Bolt (1) - Install and tighten [12x] - Fastener Specifications 
  4. Close The Endgate
scientia non olet · About LEMON Manuals